AGA-T/AGA-T+ Setup Thread

[Cicada]

How's everyone got their AGA-T/AGA-T+ setup?



How i'm running mine currently:

• Drilled/bored out top cap to 1/16" for more open draw (grown too used to my ZAP)
• 500SS mesh rolled solid (~3mm dia.)
• 5/6 wrap of 32ga (tightly) twisted kanthal wire running @ 1.6-1.8 ohms

Everything's working out pretty good so far; what's everyone else's setup with this particular RBA?

[ejoker]

no bores on mine, it's already too airy for my liking. 400ss with a length of small wick inside. 5 wraps 32 kanthal (not twisted).

[Cicada]

no bores on mine, it's already too airy for my liking. 400ss with a length of small wick inside. 5 wraps 32 kanthal (not twisted).

How's the dual-wick working? I haven't tried that kind of wick setup yet.

[ejoker]

i find it helps wicking, less of a need to tip. faster capillary action of the wick, clean flavor of ss.

[Cicada]

i find it helps wicking, less of a need to tip. faster capillary action of the wick, clean flavor of ss.

definitely need to try that out; how does it compare to just a straight up solid-rolled wick in your experience?

[ejoker]

never tried a solid SS, so i can't say. but SS doesn't wick all that well, at least for me.

[ejoker]

though i just sold the aga to manurse, i setup another genie with mesh as the coil. NR wire to the pos, no need for ground wire.

[kimbo55]

Anyone have a tip for plugging the fill hole with something I can "leave in" while vaping?

[intovapor_justin]

I have mine setup with 400 mesh, 28ga kanthal wrapped 4 times. Comes out to 0.8 ohms.

[mmara43]

i got a hallow ss mess with 32g kan w/ 4 wraps coming out to 1.8ohms and had no wicking problems, i'm using monkey juice. works amazing at 4.2-4.5 volts. flavor is clean and bold