PDA

View Full Version : 4/3 wrap vs 3/2 wrap?



sayurasem
10-05-2013, 12:49 AM
Which do you guys prefer using 28g round kanthal?

I like 4/3 wrap because it doesn't heat up too fast, where 3/2 heats up too fast.
Because honestly I don't really enjoy short 1 second drag... I prefer 2/3 second drag.

Just wondering why people really like super low ohm? IMO below 0.5 or maybe 0.4 not enjoyable anymore, and the cloud difference is insignificant

mastervaper
10-05-2013, 01:30 AM
I build 2/3 wrap with 26ga and get about .18 ohms. Yes I am using a safe battery but I build this low because I really enjoy the kick it has. I don't take giant rips to make clouds :P

sayurasem
10-05-2013, 09:28 AM
I build 2/3 wrap with 26ga and get about .18 ohms. Yes I am using a safe battery but I build this low because I really enjoy the kick it has. I don't take giant rips to make clouds :P

How long of a drag do you usually do?

deedupdex
10-05-2013, 09:31 AM
It really just depends on your personal preference. Some nights when I know I'm going to be drinking, I rebuild for a harder,hotter,harsh hit. Some times I rebuild and stay around the cooler .4 area. Its nice to have more than one atty and build them differently.

scary_xp
10-05-2013, 02:49 PM
when i first started all i would make was 4/3 dual coils. i love that i can drag a 4/3 like a hookah. 3/2 starts to burn my liquid. i normally use 28g

Arteel
10-06-2013, 09:02 AM
I prefer a 3/2 wrap single coil which comes out to about .5-.6 ohms.

mastervaper
10-06-2013, 09:24 PM
How long of a drag do you usually do?

Anywhere between 2-5 seconds

islandercraze
10-06-2013, 10:57 PM
on 26 gauge i go 7/6 wrap micro coil :D

rollingvape
10-07-2013, 10:14 AM
3-4 wrap using 3mm ekowool doubled up on a dual coil with 28 gauge kenthal. Its around .4 ohms and a pleasant vape. Thats just what i like. Some juice do burn at the .4 ohms. I do agree to that.

RoflmaoMan
10-07-2013, 10:18 AM
Get a delrin drip tip, it helps, or go micro coil.

rollingvape
10-07-2013, 11:04 AM
Cool. Ill try both of those out.

Sidoshi
10-07-2013, 10:30 PM
3-4 wrap using 3mm ekowool doubled up on a dual coil with 28 gauge kenthal. Its around .4 ohms and a pleasant vape.

This.

boybiki
10-08-2013, 08:48 AM
on 26 gauge i go 7/6 wrap micro coil :D

what is the difference with the micro coil and regular?

islandercraze
10-08-2013, 10:38 AM
what is the difference with the micro coil and regular?

for me i just like how i don't have to keep changing and re wrapping coils after coils.. i like that i can just put another piece of cotton without ruining the coil..
hits hard for me with micro coils

Bern Diesel SJ
10-08-2013, 06:59 PM
Micros give more vape production and throat hit. Also perforn like a subohm without actually having to go too subohm and are less prone to hot spots. I still usually wrap my micros between 0.8-1 ohm. I even micro my genny's with ss mesh. Way easier to set up.

JRawr
10-10-2013, 01:36 AM
4/3 wrap on 28 or 26 gauge for me and i use 3mm silica or 3mm ekowool and i take long drags for those clouds.

my builds are normally .3 but sometimes i get .2 and its too warm of a vape so make adjustments